"Hardware Spec.
CPU Quad Core Intel Xeon E3-1225 3.1GHz Processor
DRAM 4 GB DDR3 ECC RAM
NOTE:
1.The system memory can be increased to 8 GB by installing an additional 4GB Long-DIMM RAM module.
2.For the information of RAM module installation and compatible NAS
models, please refer to the QNAP RAM Module Installation Guide
Flash Memory 512MB DOM
Hard Drive 8 x 3.5-inch SATA 6Gb/s, SATA 3Gb/s hard drive or 2.5-inch SATA, SSD hard drive
NOTE:
The standard system is shipped without hard drives.
For the HDD compatibility list, please visit http://www.qnap.com/pro_compatibility.asp
Hard Drive Tray 8 x hot-swappable and lockable tray
LAN Port 4 x Gigabit RJ-45 Ethernet port (Optional dual-port 10 Gb network card is supported)
Note:
1. For the optional network card compatibility list, please visit http://www.qnap.com/pro_compatibility_extcard.asp
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED Indicators Status, 10 GbE, LAN, eSATA, hard drives
USB 2x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
eSATA 2 (rear)
Buttons System: Power button and reset button
LCD Panel Mono-LCD display with backlight,
Enter and Select buttons for configuration
Alarm Buzzer System warning
Form Factor 2U, rackmount
Dimensions 88(H) x 439(W) x 520(D) mm
3.46(H) x 17.28(W) x 20.47(D) inch
Weight Net weight: 12.52 kg/27.61 lb
Gross weight: 20.76 kg/45.78 lb
Sound Level (dB) Standby: 54.57 dB
In operation: 54.6 dB
(with 8 x 1TB hard drives installed)
Power Consumption (W) Sleep mode: 68W
In Operation: 132W
(with 8 x 1TB HDD installed)
Temperature 0~40?C
Relative Humidity 0~90%
Power Supply Input: 100-240V AC, 47-63Hz
Output: 300W
Expansion Slot 2 (for network and storage expansion)
VGA Reserved for system maintenance
Fan 3 x 6 cm smart cooling fan
|
No comments:
Post a Comment